This setup mimics ice lying above the drainage system. In the experiment, a fluid-filled blister is generated via liquid injection into the interface between a transparent elastic layer and a porous substrate. After injection of liquid, the fluid permeates from the blister through the porous substrate, the blister volume V(t) relaxes exponentially with time. Our lab experiments show that varying the permeability of the porous substrate k significantly impacts the relaxation timescale in the experiments.
In this paper, hydraulic jump control using electromagnetic force in a liquid metal flow is presented. The control methods used give insight into the hydraulic jump behavior in the presence of magnetic fields and electrical currents. Flowing liquid metals is a proposed solution to heat flux challenges posed in fusion reactors, specifically the tokamak. Unfortunately, thin, fast-flowing liquid metal divertor concepts for fusion reactors are susceptible to hydraulic jumps that drastically reduce the liquid metal flow speed, leading to potential problems such as excessive evaporation, unsteady power removal, and possible plasma disruption. Highly electrically conductive flows within the magnetic fields do not exhibit traditional hydraulic jump behavior. There is very little research investigating the use of externally injected electrical currents and magnetic fields to control liquid metal hydraulic jumps. By using externally injected electrical currents and a magnetic field, a Lorentz force (also referred to as j × B force) may be generated to control the liquid metal jump behavior. In this work, a free-surface liquid metal—GaInSn eutectic or “galinstan”—flow through an electrically insulating rectangular duct was investigated. It was shown that applying a Lorentz force has a repeatable and predictable impact on the hydraulic jump, which can be used for liquid metal control within next-generation fusion reactors.
The control of divertor heat loads - both steady state and transient - remains a key challenge for the successful operation of ITER and FNSF. Magnetic perturbations provide a promising technique to control ELMs (transients), but understanding their detailed impact is difficult due to their symmetry breaking nature. One approach for reducing steady state heat loads are so called 'advanced divertors' which aim at optimizing the magnetic field configuration: the snowflake and the (super-)X-divertor. It is likely that both concepts - magnetic perturbations and advanced divertors - will have to work together, and we explore their interaction based on the NSTX-U setup. An overview of different divertor configurations under the impact of magnetic perturbations is presented, and the resulting impact on plasma edge transport is investigated with the EMC3-EIRENE code.
Variations in size of the magnetic footprint of the perturbed separatrix are found, which is related to the level of flux expansion on the divertor target. Non-axisymmetric peaking of the heat flux related to the perturbed separatrix is found at the outer strike point, but only in locations where flux expansion is not too large.
The Far-infrared Tangential Interferometer/Polarimeter (FIReTIP) system has been refurbished and
is being reinstalled on the National Spherical Torus Experiment-Upgrade (NSTX-U) to supply
real-time line-integrated core electron density measurements for use in the NSTX-U plasma control
system (PCS) to facilitate real-time density feedback control of the NSTX-U plasma. Inclusion
of a visible light heterodyne interferometer in the FIReTIP system allows for real-time vibration
compensation due to movement of an internally mounted retroreflector and the FIReTIP front-end
optics. Real-time signal correction is achieved through use of a National Instruments CompactRIO
field-programmable gate array.
Pereira, Talmo D.; Aldarondo, Diego E.; Willmore, Lindsay; Kislin, Mikhail; Wang, Samuel S.-H.; Murthy, Mala; Shaevitz, Joshua W.
Abstract:
Recent work quantifying postural dynamics has attempted to define the repertoire of behaviors performed by an animal. However, a major drawback to these techniques has been their reliance on dimensionality reduction of images which destroys information about which parts of the body are used in each behavior. To address this issue, we introduce a deep learning-based method for pose estimation, LEAP (LEAP Estimates Animal Pose). LEAP automatically predicts the positions of animal body parts using a deep convolutional neural network with as little as 10 frames of labeled data for training. This framework consists of a graphical interface for interactive labeling of body parts and software for training the network and fast prediction on new data (1 hr to train, 185 Hz predictions). We validate LEAP using videos of freely behaving fruit flies (Drosophila melanogaster) and track 32 distinct points on the body to fully describe the pose of the head, body, wings, and legs with an error rate of <3% of the animal's body length. We recapitulate a number of reported findings on insect gait dynamics and show LEAP's applicability as the first step in unsupervised behavioral classification. Finally, we extend the method to more challenging imaging situations (pairs of flies moving on a mesh-like background) and movies from freely moving mice (Mus musculus) where we track the full conformation of the head, body, and limbs.
This paper examines a method for real-time control of non-inductively sustained scenarios in NSTX-U by using TRANSP,
a time-dependent integrated modeling code for prediction and interpretive analysis of tokamak experimental data, as a
simulator. The actuators considered for control in this work are the six neutral beam sources and the plasma boundary
shape. To understand the response of the plasma current, stored energy, and central safety factor to these actuators
and to enable systematic design of control algorithms, simulations were run in which the actuators were modulated and
a linearized dynamic response model was generated. A multi-variable model-based control scheme that accounts for the
coupling and slow dynamics of the system while mitigating the effect of actuator limitations was designed and
simulated. Simulations show that modest changes in the outer gap and heating power can improve the response time of
the system, reject perturbations, and track target values of the controlled values.
Kim, Donghoon; Tracy, Sally J.; Smith, Raymond F.; Gleason, Arianna E.; Bolme, Cindy A.; Prakapenka, Vitali B.; Appel, Karen; Speziable, Sergio; Wicks, June K.; Berryman, Eleanor J.; Han, Sirus K.; Schoelmerich, Markus O.; Lee, Hae Ja; Nagler, Bob; Cunningham, Eric F.; Akin, Minta C.; Asimow, Paul D.; Eggert, Jon H.; Duffy, Thomas S.
Abstract:
The behavior of forsterite, Mg2SiO4, under dynamic compression is of fundamental importance for understanding its phase transformations and high-pressure behavior. Here, we have carried out an in situ X-ray diffraction study of laser-shocked poly- and single-crystal forsterite (a-, b-, and c- orientations) from 19 to 122 GPa using the Matter in Extreme Conditions end-station of the Linac Coherent Light Source. Under laser-based shock loading, forsterite does not transform to the high-pressure equilibrium assemblage of MgSiO3 bridgmanite and MgO periclase, as was suggested previously. Instead, we observe forsterite and forsterite III, a metastable polymorph of Mg2SiO4, coexisting in a mixed-phase region from 33 to 75 GPa for both polycrystalline and single-crystal samples. Densities inferred from X-ray diffraction data are consistent with earlier gas-gun shock data. At higher stress, the behavior observed is sample-dependent. Polycrystalline samples undergo amorphization above 79 GPa. For [010]- and [001]-oriented crystals, a mixture of crystalline and amorphous material is observed to 108 GPa, whereas the [100]-oriented crystal adopts an unknown crystal structure at 122 GPa. The Q values of the first two sharp diffraction peaks of amorphous Mg2SiO4 show a similar trend with compression as those observed for MgSiO3 glass in both recent static and laser-compression experiments. Upon release to ambient pressure, all samples retain or revert to forsterite with evidence for amorphous material also present in some cases. This study demonstrates the utility of femtosecond free-electron laser X-ray sources for probing the time evolution of high-pressure silicates through the nanosecond-scale events of shock compression and release.
A subset of the Fermi-LAT public data for use with NPTFit:
https://github.com/bsafdi/NPTFit
The data here is for use with the Jupyter example notebooks provided with the
main code. Details of the files provided are given below. All files are provided
as numpy arrays binned as nside=128 HEALPix maps.
For the full public data, see:
http://fermi.gsfc.nasa.gov/ssc/data/access/
In this publication we provide the LAMMPS example files to reproduce simulations for the manuscript "A Deep Potential model for liquid-vapor equilibrium and cavitation rates of water"
