Search

Start Over

103. Spike Trains of Retinal Ganglion Cells Viewing a Repeated Natural Movie

Author(s):
Berry II, Michael J.
Abstract:
This archive contains spike trains simultaneously recorded from ganglion cells in the tiger salamander retina with a multi-electrode array while viewing a repeated natural movie clip. These data have been analyzed in previous papers, notably Puchalla et al. Neuron 2005 and Schneidman et al. Nature 2006.
Type:
Dataset
Issue Date:
8 March 2022

104. The Structured `Low Temperature' Phase of the Retinal Population Code

Author(s):
Ioffe, Mark Lev; Berry II, Michael J.
Abstract:
Recent advances in experimental techniques have allowed the simultaneous recordings of populations of hundreds of neurons, fostering a debate about the nature of the collective structure of population neural activity. Much of this debate has focused on the empirical findings of a phase transition in the parameter space of maximum entropy models describing the measured neural probability distributions, interpreting this phase transition to indicate a critical tuning of the neural code. Here, we instead focus on the possibility that this is a first-order phase transition which provides evidence that the real neural population is in a `structured', collective state. We show that this collective state is robust to changes in stimulus ensemble and adaptive state. We find that the pattern of pairwise correlations between neurons has a strength that is well within the strongly correlated regime and does not require fine tuning, suggesting that this state is generic for populations of 100+ neurons. We find a clear correspondence between the emergence of a phase transition, and the emergence of attractor-like structure in the inferred energy landscape. A collective state in the neural population, in which neural activity patterns naturally form clusters, provides a consistent interpretation for our results.
Type:
Dataset
Issue Date:
2017

107. Sound velocities in shock-synthesized stishovite to 72 GPa

Author(s):
Berryman, Eleanor J.; Winey, J. M.; Gupta, Yogendra M.; Duffy, Thomas S.
Abstract:
Stishovite (rutile-type SiO2) is the archetype of dense silicates and may occur in post-garnet eclogitic rocks at lower-mantle conditions. Sound velocities in stishovite are fundamental to understanding its mechanical and thermodynamic behavior at high pressure and temperature. Here, we use plate-impact experiments combined with velocity interferometry to determine the stress, density, and longitudinal sound speed in stishovite formed during shock compression of fused silica at 44 GPa and above. The measured sound speeds range from 12.3(8) km/s at 43.8(8) GPa to 9.8(4) km/s at 72.7(11) GPa. The decrease observed at 64 GPa reacts a decrease in the shear modulus of stishovite, likely due to the onset of melting. By 72 GPa, the measured sound speed agrees with the theoretical bulk sound speed indicating loss of all shear stiffness due to complete melting. Our sound velocity results provide direct evidence for shock-induced melting, in agreement with previous pyrometry data.
Type:
Dataset
Issue Date:
2019

108. Full-wave simulations of ICRF heating regimes in toroidal plasmas with non-Maxwellian distribution functions

Author(s):
Bertelli, N; Valeo, E.J.; Green, D.L.; Gorelenkova, M.; Phillips, C.K.; Podesta, M.; Lee, J.P.; Wright, J.C.; Jaeger, E.
Abstract:
At the power levels required for significant heating and current drive in magnetically-confined toroidal plasma, modification of the particle distribution function from a Maxwellian shape is likely [T. H. Stix, Nucl. Fusion, 15 737 (1975)], with consequent changes in wave propagation and in the location and amount of absorption. In order to study these effects computationally, both the finite-Larmor-radius and the high-harmonic fast wave (HHFW), versions of the full-wave, hot-plasma toroidal simulation code TORIC [M. Brambilla, Plasma Phys. Control. Fusion 41, 1 (1999) and M. Brambilla, Plasma Phys. Control. Fusion 44, 2423 (2002)], have been extended to allow the prescription of arbitrary velocity distributions of the form f(v||, v_perp, psi , theta). For hydrogen (H) minority heating of a deuterium (D) plasma with anisotropic Maxwellian H distributions, the fractional H absorption varies significantly with changes in parallel temperature but is essentially independent of perpendicular temperature. On the other hand, for HHFW regime with anisotropic Maxwellian fast ion distribution, the fractional beam ion absorption varies mainly with changes in the perpendicular temperature. The evaluation of the wave-field and power absorption, through the full wave solver, with the ion distribution function provided by either aMonte-Carlo particle and Fokker-Planck codes is also examined for Alcator C-Mod and NSTX plasmas. Non-Maxwellian effects generally tends to increase the absorption with respect to the equivalent Maxwellian distribution.
Type:
Dataset
Issue Date:
May 2017

109. Resonance in Fast-Wave Amplitude in the Periphery of Cylindrical Plasmas and Application to Edge Losses of Wave Heating Power in Tokamaks

Author(s):
Perkins, R.J.; Hosea, J.C.; Bertelli, N.; Taylor, G.; Wilson, J.R.
Abstract:
Heating magnetically confined plasmas using waves in the ion-cyclotron range of frequencies typically requires coupling these waves over a steep density gradient. This process has produced an unexpected and deleterious phenomenon on the National Spherical Torus eXperiment (NSTX): a prompt loss of wave power along magnetic field lines in front of the antenna to the divertor. Understanding this loss may be key to achieving effective heating and expanding the operational space of NSTX-Upgrade. Here, we propose that a new type of mode, which conducts a significant fraction of the total wave power in the low-density peripheral plasma, is driving these losses. We demonstrate the existence of such modes, which are distinct from surface modes and coaxial modes, in a cylindrical cold-plasma model when a half wavelength structure fits into the region outside the core plasma. The latter condition generalizes the previous hypothesis regarding the occurence of the edge losses and may explain why full-wave simulations predict these losses in some cases but not others. If valid, this condition implies that outer gap control is a potential strategy for mitigating the losses in NSTX-Upgrade in addition to raising the magnetic field or influencing the edge density.
Type:
Dataset
Issue Date:
July 2016

110. Two-dimensional full-wave simulations of waves in space and tokamak plasmas

Author(s):
Kim, E.-W.; Bertelli, N.; Johnson, J.R.; Valeo, E.; Hosea, J.; Perkins, R.
Abstract:
We illustrate the capabilities of a recently developed two-dimensional full wave code (FW2D) in space and tokamak plasmas by adopting various values of density, magnetic field configuration and strength as well as boundary shape. As example, we first showed fast compressional wave propagation in the inner magnetosphere is dramatically modified by a plasmaspheric plume at Earth's magnetosphere. The results show that wave energy is trapped in the plume showing a leaky eigenmode-like structure with plume, which is similar to the detected magnetosonic waves. We also performed simulations of high harmonic fast waves in the scrape-off layer (SOL) plasmas of the National Spherical Torus eXperiment (NSTX)/NSTX-Upgrade. Comparison the results with previous full-wave simulations show that although the FW2D code uses a cold plasma approximation, the electric field and the fraction of the power losses in the SOL plasmas show excellent consistency and agreement with the previous full wave simulations performed by the AORSA code.
Type:
Dataset
Issue Date:
October 2018

113. Distinct cytoskeletal proteins define zones of enhanced cell wall synthesis in Helicobacter pylori

Author(s):
Taylor, Jenny A.; Bratton, Benjamin P.; Sichel, Sophie R.; Blair, Kris M.; Jacobs, Holly M.; DeMeester, Kristen E.; Kuru, Erkin; Gray, Joe; Biboy, Jacob; VanNieuwenhze, Michael S.; Vollmer, Waldemar; Grimes, Catherine L.; Shaevitz, Joshua W.; Salama, Nina R.
Abstract:
Helical cell shape is necessary for efficient stomach colonization by Helicobacter pylori, but the molecular mechanisms for generating helical shape remain unclear. We show that the helical centerline pitch and radius of wild-type H. pylori cells dictate surface curvatures of considerably higher positive and negative Gaussian curvatures than those present in straight- or curved-rod bacteria. Quantitative 3D microscopy analysis of short pulses with either N-acetylmuramic acid or D-alanine metabolic probes showed that cell wall growth is enhanced at both sidewall curvature extremes. Immunofluorescence revealed MreB is most abundant at negative Gaussian curvature, while the bactofilin CcmA is most abundant at positive Gaussian curvature. Strains expressing CcmA variants with altered polymerization properties lose helical shape and associated positive Gaussian curvatures. We thus propose a model where CcmA and MreB promote PG synthesis at positive and negative Gaussian curvatures, respectively, and that this patterning is one mechanism necessary for maintaining helical shape.
Type:
Dataset and Image
Issue Date:
April 2019

115. Integrative Mechanisms of Social Attention

Author(s):
Bio, Branden; Graziano, Michael
Abstract:
Monitoring the attention of others is fundamental to social cognition. Most of the literature on the topic assumes that our social cognitive machinery is tuned specifically to the gaze direction of others as a proxy for attention. This standard assumption reduces attention to an externally visible parameter. Here we show that this assumption is wrong and a deeper, more meaningful representation is involved. We presented subjects with two cues about the attentional state of a face: direction of gaze and emotional expression. We tested whether people relied predominantly on one cue, the other, or both. If the traditional view is correct, then the gaze cue should dominate. Instead, people employed a variety of strategies, some relying on gaze, some on expression, and some on an integration of cues. We also assessed people’s social cognitive ability using two, independent, standard tests. If the traditional view is correct, then social cognitive ability, as assessed by the independent tests, should correlate with the degree to which people successfully use the gaze cue to judge the attention state of the face. Instead, social cognitive ability correlated best with the degree to which people successfully integrated the cues together, instead of with the use of any one specific cue. The results suggest a rethink of a fundamental component of social cognition: monitoring the attention of others involves constructing a deep model that is informed by a combination of cues. Attention is a rich process and monitoring the attention of others involves a similarly rich representation.
Type:
Dataset
Issue Date:
22 July 2021

116. Study of Stark Broadening of Krypton Helium-beta Lines and Estimation of Electron Density and Temperature in NIF Compressed Capsules

Author(s):
Hill, K. W.; Gao, L.; Kraus, B. F.; Bitter, M.; Efthimion, P. C.; Pablant, N. A.; Schneider, M. B.; Thorn, D. B.; Chen, H.; Kauffman, R. L.; Liedahl, D. A.; MacDonald, M. J.; MacPhee, A. G.; Scott, H. A.; Stoupin, S.; Doron, R.; Stambulchik, E.; Maron, Y.; Lahmann, B.
Abstract:
Numerical data used to draw the figures in the manuscript
Type:
Dataset
Issue Date:
6 June 2022

117. Initial Results from Boron Powder Injection Experiments in WEST Lower Single Null L-mode Plasmas

Author(s):
Bodner, Grant; Gallo, Alberto; Diallo, Ahmed; Lunsford, Robert; Moreau, Philippe; Nagy, Alex; Pellissier, Francis-Pierre; Guillemaut, Christophe; Gunn, James; Bourdelle, Clarisse; Desgranges, Corinne; Manas, Pierre; Bortolon, Alessandro; Klepper, Christopher; Tsitrone, Emanuelle; Unterberg, Ezekial; Vermare, Laure
Abstract:
Using a recently installed impurity powder dropper (IPD), boron powder (< 150 μm) was injected into lower single null (LSN) L-mode discharges in WEST. IPDs possibly enable real-time wall conditioning of the plasma-facing components and may help to facilitate H-mode access in the full-tungsten environment of WEST. The discharges in this experiment featured Ip = 0.5 MA, BT = 3.7 T, q95 = 4.3, tpulse = 12–30 s, ne,0 ~ 4×1019 m-2, and PLHCD ~ 4.5 MW. Estimates of the deuterium and impurity particle fluxes, derived from a combination of visible spectroscopy measurements and their corresponding S/XB coefficients, showed decreases of ~ 50% in O+, N+, and C+ populations during powder injection and a moderate reduction of these low-Z impurities (~ 50%) and W (~ 10%) in the discharges that followed powder injection. Along with the improved wall conditions, WEST discharges with B powder injection observed improved confinement, as the stored energy WMHD, neutron rate, and electron temperature Te increased significantly (10–25% for WMHD and 60–200% for the neutron rate) at constant input power. These increases in confinement scale up with the powder drop rate and are likely due to the suppression of ion temperature gradient (ITG) turbulence from changes in Zeff and/or modifications to the electron density profile.
Type:
Dataset
Issue Date:
2022

118. Data for Coarse-grained Intrinsically Disordered Proteins

Author(s):
Webb, Michael; Patel, Roshan; Borca, Carlos
Abstract:
This distribution compiles numerous physical properties for 2,585 intrinsically disordered proteins (IDPs) obtained by coarse-grained molecular dynamics simulation. This combination comprises "Dataset A" as reported in "Featurization strategies for polymer sequence or composition design by machine learning" by Roshan A. Patel, Carlos H. Borca, and Michael A. Webb (DOI: 10.1039/D1ME00160D). The specific IDP sequences are sourced from version 9.0 of the DisProt database. The simulations were performed using the LAMMPS molecular dynamics engine. The interactions used for simulation are obtained from R. M. Regy , J. Thompson , Y. C. Kim and J. Mittal , Improved coarse-grained model for studying sequence dependent phase separation of disordered proteins, Protein Sci., 2021, 1371 —1379.
Type:
Dataset
Issue Date:
6 May 2022

119. Data on Enzyme Activity Retention in glucose oxidase, lipase, and horseradish peroxidase

Author(s):
Webb, Michael; Patel, Roshan; Gormley, Adam; Tamasi, Matt; Borca, Carlos; Kosuri, Shashank
Abstract:
This distribution contains experimentally measured data for the extent of retained enzyme activity post thermal stressing for three distinct enzymes: glucose oxidase, lipase, and horseradish peroxidase. The data is used to form conclusions and develop machine learning models as reported in the publication "Machine Learning on a Robotic Platform for the Design of Polymer-Protein Hybrids" by Matthew Tamasi, Roshan Patel, Carlos Borca, Shashank Kosuri, Heloise Mugnier, Rahul Upadhya, N. Sanjeeva Murthy, Michael Webb*, and Adam Gormley. Details regarding the experimental protocols are reported in the aforementioned paper but are briefly discussed in the README.
Type:
Dataset
Issue Date:
17 May 2022

120. Wall conditioning and ELM mitigation with boron nitride powder injection in KSTAR

Author(s):
Gilson, Erik; Lee, H; Bortolon, A; Choe, W; Diallo, A; Hong, SH; Lee, HM; Maingi, R; Mansfield, DK; Nagy, A; Park, SH; Song, IW; Song, JI; Yun, SW; Nazikian, R
Abstract:
Results from KSTAR powder injection experiments, in which tens of milligrams of boron nitride (BN) were dropped into low-power H-mode plasmas, show an improvement in wall conditions in subsequent discharges and, in some cases, a reduction or elimination of edge-localized modes (ELMs). Injected powder is distributed by the plasma flow and is deposited on the wall and, over the course of several discharges, was observed to gradually reduce recycling by 33%, and decrease both the ELM amplitude and frequency. This is the first demonstration of the use of BN for ELM mitigation. In all of these experiments, an Impurity Powder Dropper (IPD) was used to introduce precise, controllable amounts of the materials into ELMy H-mode KSTAR discharges. The plasma duration was between 10 s and 15 s, 𝐼𝑝 = 500 kA, 𝐵𝑇 = 1.8 T, 𝑃NBI = 1.6 MW, and 𝑃ECH = 0.6 MW. Plasma densities were between 2 and 3 × 1019 m−3. In all cases, the pre-fill and startup gas-fueling was kept constant, suggesting that the decrease in baseline D𝛼 emission is in fact due to a reduction in recycling. The results presented herein highlight the viability of powder injection for intra-shot and between-shot wall conditioning.
Type:
Dataset
Issue Date:
September 2021

121. Enhancement of edge turbulence concomitant with ELM suppression during boron powder injection in EAST

Author(s):
Sun, Zhen; Maingi, Rajesh; Diallo, Ahmed; Xu, Wei; Qian, Yuzhong; Tritz, Kevin; Ye, Yang; Li, Chenglong; Xu, Zong; Wang, Yifeng; Ye, Kaixuan; Bortolon, A.; Nagy, Alex; Zhang, Ling; Duan, Yanmin; Lu, Zhiyuan; Wang, Huiqian; Shi, Tonghui; Zhao, Hailin; Wei, Gao; Xu, Jichan; Chen, Ran; Huang, Ming; Zuo, Guizhong; Xu, Guosheng; Gong, Xianzu; Hu, Jiansheng
Type:
Dataset
Issue Date:
2021

123. Modeling of Lithium Granule Injection in NSTX with M3D-C1

Author(s):
Fil, A.; Kolemen, E.; Bortolon, A.; Ferraro, N.; Jardin, S.; Parks, P.B.; Lunsford, R.; Maingi, R.
Abstract:
In this paper we present initial simulations of pedestal control by Lithium Granule Injection (LGI) in NSTX. A model for small granule ablation has been implemented in the M3D-C1 code [1], allowing the simulation of realistic Lithium granule injections. 2D simulations in NSTX L-mode and H-mode plasmas are done and the effect of granule size, injection angle and velocity on the pedestal gradient increase are studied. For H-mode cases, the amplitude of the local pressure perturbation caused by the granules is highly dependent on the solid granule size. In our simulations, reducing the granule injection velocity allows one to inject more particles at the pedestal top.
Type:
Dataset
Issue Date:
January 2017

124. Multi-species impurity granule injection and mass deposition projections in NSTX-U discharges Authors

Author(s):
Lunsford, R.; Bortolon, A.; Roquemore, A.L.; Mansfield, D.K.; Jaworski, M.A.; Kaita, R.; Maingi, R.; Nagy, A.
Abstract:
By employing a neutral gas shielding (NGS) model to characterize impurity granule injection the pedestal atomic deposition for three different species of granule: lithium, boron, and carbon are determined. Utilizing the duration of ablation events recorded on experiments performed at DIII-D to calibrate the NGS model we are able to quantify the ablation rate and mass deposition location with respect to the plasma density profile. The species specific granule shielding constant is then used to model granule ablation within NSTX-U discharges. Simulations of 300, 500 and 700 micron diameter granules injected at 50 m/sec are presented for NSTX-U L-mode type plasmas as well as H-mode discharges with low natural ELM frequencies. Additionally, ablation calculations of 500 micron granules of each species are presented at velocities ranging from 50 � 150 m/sec. In H-mode type discharges these simulations show that the majority of the injected granule is ablated within or just past the steep gradient region of the discharge. At this radial position, the perturbation to the background plasma generated by the ablating granule can lead to conditions advantageous for the rapid triggering of an ELM crash event.
Type:
Dataset
Issue Date:
July 2017

125. On the scattering correction of fast-ion D-alpha signal on NSTX-U

Author(s):
Hao, G.Z; Heidbrink, W.W.; Liu, D.; Stagner, L.; Podesta, M.; Bortolon, A.
Abstract:
Analysis of fast-ion D-alpha (FIDA) data on National Spherical Torus Experiment-Upgrade (NSTX-U) shows that the cold Dα line contaminates the FIDA baseline. The scattered light is comparable to the FIDA emission. A scattering correction is required to extract the FIDA signal. Two methods that relate the scattered light contamination to the intensity of the cold Dα line are employed. One method uses laboratory measurements with a calibration lamp; the other method uses data acquired during plasma operation and singular value decomposition analysis. After correction, both the FIDA spectra and spatial profile are in better agreement with theoretical predictions.
Type:
Dataset
Issue Date:
June 2018

126. Type-I ELM mitigation by continuous lithium granule gravitational injection into the upper tungsten divertor in EAST

Author(s):
Sun, Zhen; Yuzhong, Qian; Maingi, Rajesh; Wang, Yifeng; Wang, Yumin; Nagy, Alexander; Tritz, Kevin; Lunsford, Robert; Gilson, Erik; Zuo, Guizhong; Xu, Wei; Huang, Ming; Meng, Xiancai; Mansfield, Dennis K.; Zang, Qing; Zhu, Xiang; Lin, Xin; Liu, Haiqing; Duan, Yanmin; Zhang, Ling; Lyu, Bo; Liu, Yong; Wang, Liang; Bortolon, Alessandro; Xu, Guosheng; Gong, Xianzu; Hu, Jiansheng
Type:
Dataset
Issue Date:
2021

128. Data from a flume experiment of passive scalar diffusion within vegetation canopies using laser-induced fluorescence

Author(s):
Ghannam, Khaled; Poggi, Davide; Katul, Gabriel; Bou-Zeid, Elie
Abstract:
This dataset is a sequence of laser-induced fluorescence images of a dye injected in a channel flow with canopy-like stainless steel rods simulating a vegetation canopy stand. The data is acquired close to the channel bottom at z/h=0.2, where z is the height referenced to the channel bed and h is the canopy height. The dataset provides spatial distribution of scalar concentration in a plane parallel to the channel bed. The data has been used (but the data itself has not been published or available to the public) in previous work. The references are: Ghannam, K., Poggi, D., Porporato, A., & Katul, G. (2015). The spatio-temporal statistical structure and ergodic behaviour of scalar turbulence within a rod canopy. Boundary-Layer Meteorology,157(3), 447–460. Ghannam, K, Poggi, D., Bou-Zeid, E., Katul, G. (2020). Inverse cascade evidenced by information entropy of passive scalars in submerged canopy flows. Geophysical Research Letters (accepted).
Type:
Dataset
Issue Date:
22 April 2020

129. Princeton Open Ventilation Monitor

Author(s):
Bourrianne, Philippe; Chidzik, Stanley; Cohen, Daniel; Elmer, Peter; Hallowell, Thomas; Kilbaugh, Todd J.; Lange, David; Leifer, Andrew M.; Marlow, Daniel R.; Meyers, Peter D.; Normand, Edna; Nunes, Janine; Oh, Myungchul; Page, Lyman; Periera, Talmo; Pivarski, Jim; Schreiner, Henry; Stone, Howard A.; Tank, David W.; Thiberge, Stephan; Tully, Christopher
Abstract:
The detailed information on the design and construction of the Princeton Open Ventilation Monitor device and software are contained in this data repository. This information consists of the electrical design files, mechanical design files, bill of materials, human subject recording and analysis code, and a copy of the code repository for operating the patient monitors and central station.
Type:
Dataset, Software, and Image
Issue Date:
22 November 2021

130. Fusion Nuclear Science Facilities and Pilot Plants Based on the Spherical Tokamak

Author(s):
Menard, J.E.; Brown, T.; El-Guebaly, L.; Boyer, M.; Canik, J.; Colling, B.; Raman, R.; Wang, Z.; Zhai, Y.; Buxton, P.; Covele, B.; D'Angelo, C.; Davis, A.; Gerhardt, S.; Gryaznevich, M.; Harb, M.; Hender, T.C.; Kaye, S.; Kingham, D.; Kotschenreuther, M.; Mahajan, S.; Maingi, R.; Marriott, E.; Meier, E.T.; Mynsberge, L.; Neumeyer, C.; Ono, M.; Park, J.-K.; Sabbagh, S.A.; Soukhanovskii, V.; Valanju, P.; Woolley, R.
Abstract:
A Fusion Nuclear Science Facility (FNSF) could play an important role in the development of fusion energy by providing the nuclear environment needed to develop fusion materials and components. The spherical torus/tokamak (ST) is a leading candidate for an FNSF due to its potentially high neutron wall loading and modular configuration. A key consideration for the choice of FNSF configuration is the range of achievable missions as a function of device size. Possible missions include: providing high neutron wall loading and fluence, demonstrating tritium self-sufficiency, and demonstrating electrical self-sufficiency. All of these missions must also be compatible with a viable divertor, first-wall, and blanket solution. ST-FNSF configurations have been developed simultaneously incorporating for the first time: (1) a blanket system capable of tritium breeding ratio TBR approximately 1, (2) a poloidal field coil set supporting high elongation and triangularity for a range of internal inductance and normalized beta values consistent with NSTX/NSTX-U previous/planned operation, (3) a long-legged divertor analogous to the MAST-U divertor which substantially reduces projected peak divertor heat-flux and has all outboard poloidal field coils outside the vacuum chamber and superconducting to reduce power consumption, and (4) a vertical maintenance scheme in which blanket structures and the centerstack can be removed independently. Progress in these ST-FNSF missions vs. configuration studies including dependence on plasma major radius R0 for a range 1m to 2.2m are described. In particular, it is found the threshold major radius for TBR = 1 is R0 greater than or equal to 1.7m, and a smaller R0=1m ST device has TBR approximately 0.9 which is below unity but substantially reduces T consumption relative to not breeding. Calculations of neutral beam heating and current drive for non-inductive ramp-up and sustainment are described. An A=2, R0=3m device incorporating high-temperature superconductor toroidal field coil magnets capable of high neutron fluence and both tritium and electrical self-sufficiency is also presented following systematic aspect ratio studies.
Type:
Dataset
Issue Date:
October 2016

131. Design and simulation of the snowflake divertor control for NSTX-U

Author(s):
Vail, P. J.; Boyer, M. D.; Welander, A. S.; Kolemen, E.; U.S. Department of Energy contract number DE-AC02-09CH11466
Abstract:
This paper presents the development of a physics-based multiple-input-multiple-output algorithm for real-time feedback control of snowflake divertor (SFD) configurations on the National Spherical Torus eXperiment Upgrade (NSTX-U). A model of the SFD configuration response to applied voltages on the divertor control coils is first derived and then used, in conjunction with multivariable control synthesis techniques, to design an optimal state feedback controller for the configuration. To demonstrate the capabilities of the controller, a nonlinear simulator for axisymmetric shape control was developed for NSTX-U which simultaneously evolves the currents in poloidal field coils based upon a set of feedback-computed voltage commands, calculates the induced currents in passive conducting structures, and updates the plasma equilibrium by solving the free-boundary Grad-Shafranov problem. Closed-loop simulations demonstrate that the algorithm enables controlled operations in a variety of SFD configurations and provides capabilities for accurate tracking of time-dependent target trajectories for the divertor geometry. In particular, simulation results suggest that a time-varying controller which can properly account for the evolving SFD dynamical response is not only desirable but necessary for achieving acceptable control performance. The algorithm presented in this paper has been implemented in the NSTX-U Plasma Control System in preparation for future control and divertor physics experiments.
Type:
Dataset
Issue Date:
April 2019

132. Real-time capable modeling of neutral beam injection on NSTX-U using neural networks

Author(s):
Boyer, M.D.; Kaye, S.; Erickson, K.
Abstract:
A new model of heating, current drive, torque and other effects of neutral beam injection on NSTX-U that uses neural networks has been developed. The model has been trained and tested on the results of the Monte Carlo code NUBEAM for the database of experimental discharges taken during the first operational campaign of NSTX-U. By projecting flux surface quantities onto empirically derived basis functions, the model is able to efficiently and accurately reproduce the behavior of both scalars, like the total neutron rate and shine through, and profiles, like beam current drive and heating. The model has been tested on the NSTX-U real-time computer, demonstrating a rapid execution time orders of magnitude faster than the Monte Carlo code that is well suited for the iterative calculations needed to interpret experimental results, optimization during scenario development activities, and real-time plasma control applications. Simulation results of a proposed design for a nonlinear observer that embeds the neural network calculations to estimate the poloidal flux profile evolution, as well as effective charge and fast ion diffusivity, are presented.
Type:
Dataset
Issue Date:
February 2019

133. Prediction of electron density and pressure profile shapes on NSTX-U using neural networks

Author(s):
Boyer, Mark; Chadwick, Jason
Abstract:
A new model for prediction of electron density and pressure profile shapes on NSTX and NSTX-U has been developed using neural networks. The model has been trained and tested on measured profiles from experimental discharges during the first operational campaign of NSTX-U. By projecting profiles onto empirically derived basis functions, the model is able to efficiently and accurately reproduce profile shapes. In order to project the performance of the model to upcoming NSTX-U operations, a large database of profiles from the operation of NSTX is used to test performance as a function of available data. The rapid execution time of the model is well suited to the planned applications, including optimization during scenario development activities, and real-time plasma control. A potential application of the model to real-time profile estimation is demonstrated.
Type:
Dataset
Issue Date:
February 2021

134. TRANSP-based closed-loop simulations of current profile optimal regulation in NSTX-Upgrade

Author(s):
Ilhan, Z.O.; Boyer. M.D.; Schuster, E.
Abstract:
Active control of the toroidal current density profile is critical for the upgraded National Spherical Torus eXperiment device (NSTX-U) to maintain operation at the desired high-performance, MHD-stable, plasma regime. Initial efforts towards current density profile control have led to the development of a control-oriented, physics-based, plasma-response model, which combines the magnetic diffusion equation with empirical correlations for the kinetic profiles and the non-inductive current sources. The developed control-oriented model has been successfully tailored to the NSTX-U geometry and actuators. Moreover, a series of efforts have been made towards the design of model-based controllers, including a linear-quadratic-integral optimal control strategy that can regulate the current density profile around a prescribed target profile while rejecting disturbances. In this work, the tracking performance of the proposed current-profile optimal controller is tested in numerical simulations based on the physics-oriented code TRANSP. These high-fidelity closed-loop simulations, which are a critical step before experimental implementation and testing, are enabled by a flexible framework recently developed to perform feedback control design and simulation in TRANSP.
Type:
Dataset
Issue Date:
March 2019

135. A dual-mechanism antibiotic kills Gram-negative bacteria and avoids drug resistance

Author(s):
Martin, James K; Sheehan, Joseph P; Bratton, Benjamin P; Moore, Gabriel M; Mateus, André; Li, Sophia Hsin-Jung; Kim, Hahn; Rabinowitz, Joshua D; Typas, Athanasios; Savitski, Mikhail M; Wilson, Maxwell Z; Gitai, Zemer
Abstract:
The rise of antibiotic resistance and declining discovery of new antibiotics have created a global health crisis. Of particular concern, no new antibiotic classes have been approved for treating Gram-negative pathogens in decades. Here, we characterize a compound, SCH-79797, that kills both Gram-negative and Gram-positive bacteria through a unique dual-targeting mechanism of action (MoA) with undetectably-low resistance frequencies. To characterize its MoA, we combined quantitative imaging, proteomic, genetic, metabolomic, and cell-based assays. This pipeline demonstrates that SCH-79797 has two independent cellular targets, folate metabolism and bacterial membrane integrity, and outperforms combination treatments in killing MRSA persisters. Building on the molecular core of SCH-79797, we developed a derivative, Irresistin-16, with increased potency and showed its efficacy against Neisseria gonorrheae in a mouse vaginal infection model. This promising antibiotic lead suggests that combining multiple MoAs onto a single chemical scaffold may be an underappreciated approach to targeting challenging bacterial pathogens.
Type:
Dataset
Issue Date:
20 May 2020

137. Supplemental material for: Verification, validation, and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane

Author(s):
Swanson, CPS; Kahn, S; Rana, C; Titus, PH; Brooks, AW; Guttenfelder, W; Zhai, Y; Brown, TG; Menard, JE
Abstract:
This is the supplemental material for the manuscript "Verification, validation, and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane" submitted to Fusion Engineering and Design. This material includes PDF writeups of the derivations of the axisymmetric extended plane strain model, the elastic properties smearing model, and 20+ MATLAB scripts and functions which implement the model and generate the figures in the paper.
Type:
collection, Dataset, and Software
Issue Date:
2022

138. Modelling of Ablatant Deposition from Electromagnetically Driven Radiative Pellets for Disruption Mitigation Studies

Author(s):
Lunsford, Robert; Raman, Roger; Brooks, Arthur; Ellis, Robert A.; Lay, W-S;
Abstract:
The Electromagnetic Particle Injector (EPI) concept is advanced through the simulation of ablatant deposition into ITER H-mode discharges with calculations showing penetration past the H-mode pedestal for a range of injection velocities and granule sizes concurrent with the requirements of disruption mitigation. As discharge stored energy increases in future fusion devices such as ITER, control and handling of disruption events becomes a critical issue. An unmitigated disruption could lead to failure of the plasma facing components resulting in financially and politically costly repairs. Methods to facilitate the quench of an unstable high current discharge are required. With the onset warning time for some ITER disruption events estimated to be less than 10 ms, a disruption mitigation system needs to be considered which operates at injection speeds greater than gaseous sound speeds. Such an actuator could then serve as a means to augment presently planned pneumatic injection systems. The EPI uses a rail gun concept whereby a radiative payload is delivered into the discharge by means of the JxB forces generated by an external current pulse, allowing for injection velocities in excess of 1 km/s. The present status of the EPI project is outlined, including the addition of boost magnetic coils. These coils augment the self-generated rail gun magnetic field and thus provide a more efficient acceleration of the payload. The coils and the holder designed to constrain them have been modelled with the ANSYS code to ensure structural integrity through the range of operational coil cu
Type:
Dataset
Issue Date:
June 2019

139. Reductions in Retrieval Competition Predict the Benefit of Repeated Testing

Author(s):
Rafidi, Nicole S; Hulbert, Justin C; Brooks, Paula P; Norman, Kenneth A
Abstract:
Repeated testing (as opposed to repeated study) leads to improved long-term memory retention, but the mechanism underlying this improvement remains controversial. In this work, we test the hypothesis that retrieval practice benefits subsequent recall by reducing competition from related memories. This hypothesis implies that the degree of reduction in competition between retrieval practice attempts should predict subsequent memory for the practiced items. To test this prediction, we collected electroencephalography (EEG) data across two sessions. In the first session, participants practiced selectively retrieving exemplars from superordinate semantic categories (high competition), as well as retrieving the names of the superordinate categories from exemplars (low competition). In the second session, participants repeatedly studied and were then tested on Swahili-English vocabulary. One week after session two, participants were again tested on the vocabulary. We trained a within-subject classifier on the data from session one to distinguish high and low competition states. We then used this classifier to measure competition across multiple retrieval practice attempts in the second session. The degree to which competition decreased for a given vocabulary word predicted whether that item was subsequently remembered in the third session. These results are consistent with the hypothesis that repeated testing improves retention by reducing competition.
Type:
Dataset
Issue Date:
April 2018

142. Princeton Dynamic Stall Database: Upward ramp-type pitching motions

Author(s):
Kiefer, Janik; Brunner, Claudia E.; Hansen, Martin O. L.; Hultmark, Marcus
Abstract:
This data set contains data of a NACA 0021 airfoil as it undergoes upward ramp-type pitching motions at high Reynolds numbers and low Mach numbers. The parametric study covers a wide range of chord Reynolds numbers, reduced frequencies and pitching geometries characterized by varying mean angle and angle amplitude. The data were acquired in the High Reynolds number Test Facility at Princeton University, which is a closed-loop wind tunnel that can be pressurized up to 23 MPa and allowed for variation of the chord Reynolds number over a range of 5.0 × 10^5 ≤ Re_c ≤ 5.5 × 10^6. Data were acquired using 32 pressure taps along the surface of the airfoil. The data are the phase-averaged results of 150 individual half-cycles for any given test case.
Type:
Dataset
Issue Date:
6 July 2022

143. Static measurements of a NACA 0021 airfoil at high Reynolds numbers

Author(s):
Brunner, Claudia E.; Kiefer, Janik; Hansen, Martin O. L.; Hultmark, Marcus
Abstract:
Reynolds number effects on the aerodynamics of the moderately thick NACA 0021 airfoil were experimentally studied by means of surface-pressure measurements. The use of a high-pressure wind tunnel allowed for variation of the chord Reynolds number over a range of 5.0 × 10^5 ≤ Re_c ≤ 7.9 × 10^6. The angle of attack was incrementally increased and decreased over a range of 0° ≤ alpha ≤ 40°, spanning both the attached and stalled regime at all Reynolds numbers. As such, attached and separated conditions, as well as the static stall and reattachment processes were studied. A fundamental change in the flow behaviour was observed around Re_c= 2.0 × 10^6. As the Reynolds number was increased beyond this value, the stall type gradually shifted from trailing-edge stall to leading-edge stall. The stall angle and the maximum lift coefficient increased with Reynolds number. Once the flow was separated, the separation point moved upstream and the suction peak decreased in magnitude with increasing Reynolds number. Two distinct types of hysteresis in reattachment were observed.
Type:
Dataset
Issue Date:
4 August 2021

144. Elemental and topographical imaging of microscopic variations in deposition on NSTX-U and DIII-D samples2

Author(s):
C.H. Skinner, C.P. Chrobak, R. Kaita, B.E.Koel
Abstract:
Abstract: Tokamak plasma facing components have surface roughness that can cause microscopic spatial variations in erosion and deposition and hence influence material migration, erosion lifetime, dust and tritium accumulation, and plasma contamination. However high spatial resolution measurements of deposition on the scale of the surface roughness have been lacking to date. We will present elemental images of graphite samples from NSTX-U and DIII-D DiMES experiments performed with a Scanning Auger Microprobe at sub-micron resolution that show strong microscopic variations in deposition and correlate this with 3D topographical maps of surface irregularities. The NSTX-U samples were boronized and exposed to deuterium plasmas and the DiMES samples had localized Al and W films and were exposed to dedicated helium plasmas. Topographical maps of the samples were performed with a 3D confocal optical microscope and compared to the elemental deposition pattern. The results revealed localized deposition concentrated in areas shadowed from the ion flux, incident in a direction calculated (for the DiMES case) by taking account of the magnetic pre-sheath.
Type:
Dataset
Issue Date:
April 2019

145. Deep Potential training data for crystalline and disordered TiO2 phases

Author(s):
Calegari Andrade, Marcos; Selloni, Annabella
Abstract:
Data set used to train a Deep Potential (DP) model for crystalline and disordered TiO2 phases. Training data contain atomic forces, potential energy, atomic coordinates and cell tensor. Energy and forces were evaluated with the density functional SCAN, as implemented in Quantum-ESPRESSO. Atomic configurations of crystalline systems were generated by random perturbation of atomic positions (0-0.3 A) and cell tensor (1-10%). Amorphous TiO2 was explored by DP molecular dynamics (DPMD) at temperatures in the range 300−2500 K and pressure in the range 0−81 GPa.
Type:
Dataset
Issue Date:
9 October 2020

146. Deep Potential training data for subcritical and supercritical water

Author(s):
Calegari Andrade, Marcos; Ko, Hsin-Yu; Car, Roberto
Abstract:
Data set used to train a Deep Potential (DP) model for subcritical and supercritical water. Training data contain atomic forces, potential energy, atomic coordinates and cell tensor. Energy and forces were evaluated with the density functional SCAN. Atomic configurations were extracted from DP molecular dynamics at P = 250 bar and T = 553, 623, 663, 733 and 823 K. Input files used to train the DP model are also provided.
Type:
Dataset
Issue Date:
19 August 2020

151. Exploration of magnetic perturbation effects on advanced divertor configurations in NSTX-U

Author(s):
Frerichs, H.; Waters, I.; Schmitz, O.; Canal, G.P.; Evans, T.E.; Feng, Y.; Soukhanovskii, V.A.
Abstract:
The control of divertor heat loads - both steady state and transient - remains a key challenge for the successful operation of ITER and FNSF. Magnetic perturbations provide a promising technique to control ELMs (transients), but understanding their detailed impact is difficult due to their symmetry breaking nature. One approach for reducing steady state heat loads are so called 'advanced divertors' which aim at optimizing the magnetic field configuration: the snowflake and the (super-)X-divertor. It is likely that both concepts - magnetic perturbations and advanced divertors - will have to work together, and we explore their interaction based on the NSTX-U setup. An overview of different divertor configurations under the impact of magnetic perturbations is presented, and the resulting impact on plasma edge transport is investigated with the EMC3-EIRENE code. Variations in size of the magnetic footprint of the perturbed separatrix are found, which is related to the level of flux expansion on the divertor target. Non-axisymmetric peaking of the heat flux related to the perturbed separatrix is found at the outer strike point, but only in locations where flux expansion is not too large.
Type:
Dataset
Issue Date:
June 2016

152. ELM frequency enhancement and discharge modification through lithium granule injection into EAST H-modes

Author(s):
Lunsford; Hsu, J.S.; Sun, Z.; Maingi, R.; Mansfield, D.K.; Xu, W.; Zuo, G.Z.; Huang, M.; Diallo, A.; Osborne, T.; Tritz, K.; Canik, J.; Meng, X.C.; Gong, X.Z.; Wan, B.N.; Li, J.G.; EAST Team
Abstract:
The injection of impurity granules into fusion research discharges can serve as a catalyst for ELM events. For sufficiently low ELM frequencies, and granule sizes above a threshold, this can result in full control of the ELM cycle, referred to as ELM pacing. For this research, we extend the investigation to conditions where the natural ELM frequency is too high for ELM pacing to be realized. Utilizing multiple sizes of lithium granules and classifying their effects by granule size, we demonstrate that ELM mitigation through frequency multiplication can be used at ELM triggering rates that nominally make ELM pacing unrealizable. We find that above a size threshold, injected granules promptly trigger ELMs and commensurately enhance the ELM frequency . Below this threshold size, injection of an individual granule does not always lead to the prompt triggering of an ELM; however, collective ablation in the edge pedestal region does enhance the ELM frequency. Specifically, Li granules too small to individually trigger ELMs were injected into EAST H-mode discharges at frequencies up to 2.3 kHz; collectively the granules were observed to enhance the natural ELM frequency up to 620 Hz, resulting in a ~2.4x multiplication of the natural ELM frequency and a 50% decrease of the ELM size.
Type:
Dataset
Issue Date:
October 2018

153. Injected mass deposition thresholds for lithium granule instigated triggering of edge localized modes on EAST

Author(s):
Lunsford, R.; Sun, Z.; Maingi, R.; Hu, J.S.; Mansfield, D.; Xu, W.; Zuo, G.Z.; Diallo, A.; Osborne, T.; Tritz, K.; Canik, J.; Huang, M.; Meng, X.C.; Gong, X.Z.; Wan, B.N.; Li, J.G.
Abstract:
The ability of an injected lithium granule to promptly trigger an edge localized mode (ELM) has been established in multiple experiments. By horizontally injecting granules ranging in diameter from 200 microns to 1mm in diameter into the low field side of EAST H-mode discharges we have determined that granules with diameter > 600 microns are successful in triggering ELMs more than 95% of the time. It was also demonstrated that below 600 microns the triggering efficiency decreased roughly with granule size. Granules were radially injected from the outer midplane with velocities ~ 80 m/s into EAST upper single null discharges with an ITER like tungsten monoblock divertor. These granules were individually tracked throughout their injection cycle in order to determine their efficacy at triggering an ELM. For those granules of sufficient size, ELM triggering was a prompt response to granule injection. By simulating the granule injection with an experimentally benchmarked neutral gas shielding (NGS) model, the ablatant mass deposition required to promptly trigger an ELM is calculated and the fractional mass deposition is determined.
Type:
Dataset
Issue Date:
December 2017

154. ELM elimination with Li powder injection in EAST discharges using the tungsten upper divertor

Author(s):
Maingi, R.; Hu, J.S.; Sun, Z.; Tritz, K.; Zuo, G.Z.; Xu, W.; Huang, M.; Meng, X.C.; Canik, J.M.; Diallo, A.; Lunsford, R.; Mansfield, D.K.; Osborne, T.H.; Gong, X.Z.; Wang, Y.F.; Li, Y.Y.
Abstract:
We report the first successful use of lithium (Li) to eliminate edge-localized modes (ELMs) with tungsten divertor plasma-facing components in the EAST device. Li powder injected into the scrape-off layer of the tungsten upper divertor successfully eliminated ELMs for 3-5 sec in EAST. The ELM elimination became progressively more effective in consecutive discharges at constant lithium delivery rates, and the divertor D-alpha baseline emission was reduced, both signatures of improved wall conditioning. A modest decrease in stored energy and normalized energy confinement was also observed, but the confinement relative to H98 remained well above 1, extending the previous ELM elimination results via Li injection into the lower carbon divertor in EAST [J.S. Hu et al., Phys. Rev. Lett. 114 (2015) 055001]. These results can be compared with recent observations with lithium pellets in ASDEX-Upgrade that failed to mitigate ELMs [P.T. Lang et al., Nucl. Fusion 57 (2017) 016030], highlighting one comparative advantage of continuous powder injection for real-time ELM elimination.
Type:
Dataset
Issue Date:
December 2017

155. Data from "Manifestations of metastable criticality in glassy water-like models detected by large-scale structural properties"

Author(s):
Gartner III, Thomas E.; Torquato, Salvatore; Car, Roberto; Debenedetti, Pablo G.
Abstract:
This dataset contains all data related to the publication "Manifestations of metastable criticality in glassy water-like models detected by large-scale structural properties" by Gartner et al., in preparation 2020. In this work, we used molecular dynamics simulations to explore the relationship between water's polyamorphism (multiple amorphous solid states) and its hypothesized liquid-liquid transition. Using the TIP4P/2005 molecular model of water, we found a surprising signature of water's liquid-liquid critical point in the long-range structure of water's amorphous solid states formed by isobaric cooling at different pressures. This structural signature was absent in two other systems that lack a critical point. This dataset contains molecular dynamics simulation trajectories, as well as processed data, analysis codes, and image files used in the publication.
Type:
Dataset
Issue Date:
3 December 2020

156. Data from "Melting curves of ice polymorphs in the vicinity of the liquid-liquid critical point"

Author(s):
Piaggi, Pablo M; Gartner, Thomas E; Car, Roberto; Debenedetti, Pablo G
Abstract:
The possible existence of a liquid-liquid critical point in deeply supercooled water has been a subject of debate in part due to the challenges associated with providing definitive experimental evidence. Pioneering work by Mishima and Stanley [Nature 392, 164 (1998) and Phys.~Rev.~Lett. 85, 334 (2000)] sought to shed light on this problem by studying the melting curves of different ice polymorphs and their metastable continuation in the vicinity of the expected location of the liquid-liquid transition and its associated critical point. Based on the continuous or discontinuous changes in slope of the melting curves, Mishima suggested that the liquid-liquid critical point lies between the melting curves of ice III and ice V. Here, we explore this conjecture using molecular dynamics simulations with a purely-predictive machine learning model based on ab initio quantum-mechanical calculations. We study the melting curves of ices III, IV, V, VI, and XIII using this model and find that the melting lines of all the studied ice polymorphs are supercritical and do not intersect the liquid-liquid transition locus. We also find a pronounced, yet continuous, change in slope of the melting lines upon crossing of the locus of maximum compressibility of the liquid. Finally, we analyze critically the literature in light of our findings, and conclude that the scenario in which melting curves are supercritical is favored by the most recent computational and experimental evidence. Thus, although the preponderance of experimental and computational evidence is consistent with the existence of a second critical point in water, the behavior of the melting lines of ice polymorphs does not provide strong evidence in support of this viewpoint, according to our calculations.
Type:
Dataset
Issue Date:
February 2023

157. Data from "Signatures of a liquid-liquid transition in an ab initio deep neural network model for water"

Author(s):
Gartner, Thomas III; Zhang, Linfeng; Piaggi, Pablo; Car, Roberto; Panagiotopoulos, Athanassios; Debenedetti, Pablo
Abstract:
This dataset contains all data related to the publication "Signatures of a liquid-liquid transition in an ab initio deep neural network model for water", by Gartner et al., 2020. In this work, we used neural networks to generate a computational model for water using high-accuracy quantum chemistry calculations. Then, we used advanced molecular simulations to demonstrate evidence that suggests this model exhibits a liquid-liquid transition, a phenomenon that can explain many of water's anomalous properties. This dataset contains links to all software used, all data generated as part of this work, as well as scripts to generate and analyze all data and generate the plots reported in the publication.
Type:
Dataset
Issue Date:
July 2020

158. Attentional Modulation of Brain Responses to Primary Appetitive and Aversive Stimuli

Author(s):
Cara L. Buck; Jonathan D. Cohen; Field, Brent; Daniel Kahneman; Samuel M. McClure; Leigh E. Nystrom
Abstract:
Studies of subjective well-being have conventionally relied upon self-report, which directs subjects’ attention to their emotional experiences. This method presumes that attention itself does not influence emotional processes, which could bias sampling. We tested whether attention influences experienced utility (the moment-by-moment experience of pleasure) by using functional magnetic resonance imaging (fMRI) to measure the activity of brain systems thought to represent hedonic value while manipulating attentional load. Subjects received appetitive or aversive solutions orally while alternatively executing a low or high attentional load task. Brain regions associated with hedonic processing, including the ventral striatum, showed a response to both juice and quinine. This response decreased during the high-load task relative to the low-load task. Thus, attentional allocation may influence experienced utility by modulating (either directly or indirectly) the activity of brain mechanisms thought to represent hedonic value.
Type:
Dataset, Software, and text
Issue Date:
11 February 2015

161. Achromonodin-1 NMR spectra

Author(s):
Link, A. James; Carson, Drew V.; So, Larry; Cheung-Lee, Wai Ling
Abstract:
This entry encompasses the raw NMR spectra used to determine the structure of the lasso peptide achromonodin-1. Within one file are included the five following spectra: COSY, TOCSY, NOESY (150 ms mixing time), NOESY (700 ms mixing time), and C,H HSQC. The file requires Mestrenova software to read. These spectra were used to develop the 3D structure models of achromonodin-1 that are deposited at the protein data bank (PDB) as entry 8SVB.
Type:
Dataset
Issue Date:
June 2023

162. Effects of Axial Boundary Conductivity on a Free Stewartson-Shercliff Layer

Author(s):
Caspary, Kyle J.; Choi, Dahan; Ebrahimi, Fatima; Gilson, Erik P.; Goodman, Jeremy; Ji, Hantao
Abstract:
The effects of axial boundary conductivity on the formation and stability of a magnetized free Stewartson-Shercliff layer (SSL) in a short Taylor-Couette device are reported. As the axial field increases with insulating endcaps, hydrodynamic Kelvin-Helmholtz-type instabilities set in at the SSLs of the conducting fluid, resulting in a much reduced flow shear. With conducting endcaps, SSLs respond to an axial field weaker by the square root of the conductivity ratio of endcaps to fluid. Flow shear continuously builds up as the axial field increases despite the local violation of the Rayleigh criterion, leading to a large number of hydrodynamically unstable modes. Numerical simulations of both the mean flow and the instabilities are in agreement with the experimental results.
Type:
Dataset
Issue Date:
2018

165. Design of Faraday cup ion detectors built by thin film deposition

Author(s):
Szalkowski, G.A.; Darrow, D.S.; Cecil, F.E.
Abstract:
Thin film Faraday cup detectors can provide measurements of fast ion loss from magnetically confined fusion plasmas. These multilayer detectors can resolve the energy distribution of the lost ions in addition to giving the total loss rate. Prior detectors were assembled from discrete foils and insulating sheets. Outlined here is a design methodology for creating detectors using thin film deposition that are suited to particular scientific goals. The intention is to use detectors created by this method on JET and NSTX-U. The detectors will consist of alternating layers of aluminum and silicon dioxide, with layer thicknesses chosen to isolate energies of interest. Thin film deposition offers the advantage of relatively simple and more mechanically robust construction compared to other methods, as well as allowing precise control of film thickness. Furthermore, this depositional fabrication technique places the layers in intimate thermal contact, providing for three-dimensional conduction and dissipation of the ion-produced heating in the layers, rather than the essentially two-dimensional heat conduction in the discrete foil stack implementation.
Type:
Dataset
Issue Date:
January 2017

167. Verification of the global gyrokinetic stellarator code XGC-S for linear ion temperature gradient driven modes

Author(s):
Cole M; Hager R; Moritaka T; Dominski J; Kleiber R; Ku S; Lazerson S; Riemann J; Chang C
Abstract:
XGC (X-point Gyrokinetic Code) is a whole-volume, total-f gyrokinetic particle-in-cell code developed for modelling tokamaks.In recent work, XGC has been extended to model more general 3D toroidal magnetic configurations, such as stellarators.These improvements have resulted in the XGC-S version.In this paper, XGC-S is benchmarked in the reduced delta-f limit for linear electrostatic ion temperature gradient-driven microinstabilities, which can underlie turbulent transport in stellarators.An initial benchmark of XGC-S in tokamak geometry shows good agreement with the XGC1, ORB5, and global GENE codes.A benchmark between XGC-S and the EUTERPE global gyrokinetic code for stellarators has also been performed, this time in geometry of the optimised stellarator Wendelstein 7-X.Good agreement has been found for the mode number spectrum, mode structure, and growth rate.
Type:
Dataset
Issue Date:
August 2019

168. Effects of collisional ion orbit loss on neoclassical tokamak radial electric fields

Author(s):
Zhu, Hongxuan; Stoltzfus-Dueck, T; Hager, R; Ku, S; Chang, C. S.
Abstract:
Ion orbit loss is considered important for generating the radially inward electric field Er in a tokamak edge plasma. In particular, this effect is emphasized in diverted tokamaks with a magnetic X point. In neoclassical equilibria, Coulomb collisions can scatter ions onto loss orbits and generate a radially outward current, which in steady state is balanced by the radially inward current from viscosity. To quantitatively measure this loss-orbit current in an edge pedestal, an ion-orbit-flux diagnostic has been implemented in the axisymmetric version of the gyrokinetic particle-in-cell code XGC. As the first application of this diagnostic, a neoclassical DIII-D H-mode plasma is studied using gyrokinetic ions and adiabatic electrons. The validity of the diagnostic is demonstrated by studying the collisional relaxation of Er in the core. After this demonstration, the loss-orbit current is numerically measured in the edge pedestal in quasisteady state. In this plasma, it is found that the radial electric force on ions from Er approximately balances the ion radial pressure gradient in the edge pedestal, with the radial force from the plasma flow term being a minor component. The effect of orbit loss on Er is found to be only mild.
Type:
Dataset
Issue Date:
2022

170. Gyrokinetic understanding of the edge pedestal transport driven by resonant magnetic perturbations in a realistic divertor geometry

Author(s):
Hager, R.; Chang, C. S.; Ferraro, N. M.; Nazikian R.
Abstract:
Self-consistent simulations of neoclassical and electrostatic turbulent transport in a DIII-D H-mode edge plasma under resonant magnetic perturbations (RMPs) have been performed using the global total-f gyrokinetic particle-in-cell code XGC, in order to study density-pump out and electron heat confinement.The RMP field is imported from the extended magneto-hydrodynamics (MHD) code M3D-C1, taking into account the linear two-fluid plasma response.With both neoclassical and turbulence physics considered together, the XGC simulation reproduces two key features of experimentally observed edge transport under RMPs: increased radial particle transport in the pedestal region that is sufficient to account for the experimental pump-out rate, and suppression of the electron heat flux in the steepest part of the edge pedestal.In the simulation, the density fluctuation amplitude of modes moving in the electron diamagnetic direction increases due to interaction with RMPs in the pedestal shoulder and outward, while the electron temperature fluctuation amplitude decreases.
Type:
Dataset
Issue Date:
June 2020

173. Neutral recycling effects on ITG turbulence

Author(s):
Stotler, D.P.; Lang, J.; Chang, C.S.; Churchill, R.M.; Ku, S.-H.
Abstract:
The effects of recycled neutral atoms on tokamak ion temperature gradient (ITG) driven turbulence have been investigated in a steep edge pedestal, magnetic separatrix configuration, with the full-f edge gryokinetic code XGC1. Ion temperature gradient turbulence is the most fundamental and robust edge plasma instability, having a long radial correlation length and an ability to impact other forms of pedestal turbulence. The neutral atoms enhance the ITG turbulence, first, by increasing the ion temperature gradient in the pedestal via the cooling effects of charge exchange and, second, by a relative reduction in the ExB shearing rate.
Type:
Dataset
Issue Date:
August 2017

174. The 21st year: transcription, motif list, and relation score

Author(s):
Chang, Claire H. C.; Lazaridi, Christina; Yeshurun, Yaara; Norman, Kenneth A.; Hasson, Uri
Abstract:
This study examined how the brain dynamically updates event representations by integrating new information over multiple minutes while segregating irrelevant input. A professional writer custom-designed a narrative with two independent storylines, interleaving across minute-long segments (ABAB). In the last (C) part, characters from the two storylines meet and their shared history is revealed. Part C is designed to induce the spontaneous recall of past events, upon the recurrence of narrative motifs from A/B, and to shed new light on them. Our fMRI results showed storyline-specific neural patterns, which were reinstated (i.e. became more active) during storyline transitions. This effect increased along the processing timescale hierarchy, peaking in the default mode network. Similarly, the neural reinstatement of motifs was found during part C. Furthermore, participants showing stronger motif reinstatement performed better in integrating A/B and C events, demonstrating the role of memory reactivation in information integration over intervening irrelevant events.
Type:
Dataset and text
Issue Date:
2021

175. Dynamic reconfiguration of the default mode network during narrative comprehension

Author(s):
Simony, Erez; Honey, Christopher; Chen, Janice; Lositsky, Olga; Yeshurun, Yaara; Wiesel, Ami; Hasson, Uri
Abstract:
Does the default mode network (DMN) reconfigure to encode information about the changing environment? This question has proven difficult, because patterns of functional connectivity reflect a mixture of stimulus-induced neural processes, intrinsic neural processes and non-neuronal noise. Here we introduce inter-subject functional correlation (ISFC), which isolates stimulus-dependent inter-regional correlations between brains exposed to the same stimulus. During fMRI, we had subjects listen to a real-life auditory narrative and to temporally scrambled versions of the narrative. We used ISFC to isolate correlation patterns within the DMN that were locked to the processing of each narrative segment and specific to its meaning within the narrative context. The momentary configurations of DMN ISFC were highly replicable across groups. Moreover, DMN coupling strength predicted memory of narrative segments. Thus, ISFC opens new avenues for linking brain network dynamics to stimulus features and behaviour.
Type:
Dataset
Issue Date:
18 July 2016

176. Neural pattern change during encoding of a narrative predicts retrospective duration estimates

Author(s):
Lositsky, Olga; Chen, Janice; Toker, Daniel; Honey, Christopher; Hasson, Uri; Norman, Kenneth
Abstract:
What mechanisms support our ability to estimate durations on the order of minutes? Behavioral studies in humans have shown that changes in contextual features lead to overestimation of past durations. Based on evidence that the medial temporal lobes and prefrontal cortex represent contextual features, we related the degree of fMRI pattern change in these regions with people's subsequent duration estimates. After listening to a radio story in the scanner, participants were asked how much time had elapsed between pairs of clips from the story. Our ROI analysis found that the neural pattern distance between two clips at encoding was correlated with duration estimates in the right entorhinal cortex and right pars orbitalis. Moreover, a whole-brain searchlight analysis revealed a cluster spanning the right anterior temporal lobe. Our findings provide convergent support for the hypothesis that retrospective time judgments are driven by 'drift' in contextual representations supported by these regions.
Type:
Dataset
Issue Date:
12 March 2016

178. Sherlock Movie Watching Dataset

Author(s):
Chen, Janice
Abstract:
Our daily lives revolve around sharing experiences and memories with others. When different people recount the same events, how similar are their underlying neural representations? In this study, participants viewed a fifty-minute audio-visual movie, then verbally described the events while undergoing functional MRI. These descriptions were completely unguided and highly detailed, lasting for up to forty minutes. As each person spoke, event-specific spatial patterns were reinstated (movie-vs.-recall correlation) in default network, medial temporal, and high-level visual areas; moreover, individual event patterns were highly discriminable and similar between people during recollection (recall-vs.-recall similarity), suggesting the existence of spatially organized memory representations. In posterior medial cortex, medial prefrontal cortex, and angular gyrus, activity patterns during recall were more similar between people than to patterns elicited by the movie, indicating systematic reshaping of percept into memory across individuals. These results reveal striking similarity in how neural activity underlying real-life memories is organized and transformed in the brains of different people as they speak spontaneously about past events.
Type:
Dataset
Issue Date:
26 October 2016

179. Whistler wave generation by anisotropic tail electrons during asymmetric magnetic reconnection in space and laboratory

Author(s):
Yoo, Jongsoo; Jara-almonte, J.; Yerger, Evan; Wang, Shan; Qian, Tony; Le, Ari; Ji, Hantao; Yamada, Masaaki; Fox, William; Kim, Eun-Hwa; Chen, Li-Jen; Gershman, Daniel
Abstract:
Whistler wave generation near the magnetospheric separatrix during reconnection at the dayside magnetopause is studied with data from the Magnetospheric Multiscale (MMS) mission. The dispersion relation of the whistler mode is measured for the first time near the reconnection region in space, which shows that whistler waves propagate nearly parallel to the magnetic field line. A linear analysis indicates that the whistler waves are generated by temperature anisotropy in the electron tail population. This is caused by loss of electrons with a high velocity parallel to the magnetic field to the exhaust region. There is a positive correlation between activities of whistler waves and the lower-hybrid drift instability (LHDI) both in laboratory and space, indicating the enhanced transport by LHDI may be responsible for the loss of electrons with a high parallel velocity.
Type:
Dataset
Issue Date:
August 2018

180. Data for "Spatial heterogeneity of ammonia fluxes in a deciduous forest and adjacent grassland"

Author(s):
Guo, Xuehui; Pan, Da; Daly, Ryan; Chen, Xi; Walker, John; Tao, Lei; McSpiritt, James; Zondlo, Mark
Abstract:
Gas-phase ammonia (NH3), emitted primarily from agriculture, contributes significantly to reactive nitrogen (Nr) deposition. Excess deposition of Nr to the environment causes acidification, eutrophication, and loss of biodiversity. The exchange of NH3 between land and atmosphere is bidirectional and can be highly heterogenous when underlying vegetation and soil characteristics differ. Direct measurements that assess the spatial heterogeneity of NH3 fluxes are lacking. To this end, we developed and deployed two fast-response, quantum cascade laser-based open-path NH3 sensors to quantify NH3 fluxes at a deciduous forest and an adjacent grassland separated by 700 m in North Carolina, United States from August to November, 2017. The sensors achieved 10 Hz precisions of 0.17 ppbv and 0.23 ppbv in the field, respectively. Eddy covariance calculations showed net deposition of NH3 (-7.3 ng NH3-N m−2 s−1) to the forest canopy and emission (3.2 ng NH3-N m−2 s−1) from the grassland. NH3 fluxes at both locations displayed diurnal patterns with absolute magnitudes largest midday and with smaller peaks in the afternoons. Concurrent biogeochemistry data showed over an order of magnitude higher NH3 emission potentials from green vegetation at the grassland compared to the forest, suggesting a possible explanation for the observed flux differences. Back trajectories originating from the site identified the upwind urban area as the main source region of NH3. Our work highlights the fact that adjacent natural ecosystems sharing the same airshed but different vegetation and biogeochemical conditions may differ remarkably in NH3 exchange. Such heterogeneities should be considered when upscaling point measurements, downscaling modeled fluxes, and evaluating Nr deposition for different natural land use types in the same landscape. Additional in-situ flux measurements accompanied by comprehensive biogeochemical and micrometeorological records over longer periods are needed to fully characterize the temporal variabilities and trends of NH3 fluxes and identify the underlying driving factors.
Type:
Dataset
Issue Date:
September 2022

181. Chinese overseas development financing of electric power generation: A comparative analysis

Author(s):
Chen, Xu; Gallagher, Kevin P.; Mauzerall, Denise L.
Abstract:
Global power generation must rapidly decarbonize by mid-century to meet the goal of stabilizing global warming below 2 degree Celsius. To meet this objective, multilateral development banks (MDBs) have gradually reduced fossil fuel and increased renewable energy financing. Meanwhile, globally active national development finance institutions (DFIs) from Japan and South Korea have continued to finance overseas coal plants. Less is known about the increasingly active Chinese DFIs. Here we construct a new dataset of China’s policy banks’ overseas power generation financing and compare their technology choices and impact on generation capacity with MDBs and Japanese and South Korean DFIs. We find Chinese DFI power financing since 2000 has dramatically increased, surpassing other East Asian national DFIs and the major MDBs’ collective public sector power financing in 2013. As most Chinese DFI financing is currently in coal, decarbonization of their power investments will be critical in reducing future carbon emissions from recipient countries.
Type:
Dataset
Issue Date:
23 October 2020

182. Data for: "Financing Carbon Lock-in in Developing Countries: Bilateral Financing for Power Generation Technologies from China, Japan, and the United States"

Author(s):
Chen, Xu; Li, Zhongshu; Gallagher, Kevin P.; Mauzerall, Denise L.
Abstract:
Power sector decarbonization requires a fundamental redirection of global finance from fossil fuel infrastructure towards low carbon technologies. Bilateral finance plays an important role in the global energy transition to non-fossil energy, but an understanding of its impact is limited. Here, for the first time, we compare the influence of overseas finance from the three largest economies – United States, China, and Japan – on power generation development beyond their borders and evaluate the associated long-term CO2 emissions. We construct a new dataset of Japanese and U.S. overseas power generation finance between 2000-2018 by analyzing their national development finance institutions’ press releases and annual reports and tracking their foreign direct investment at the power plant level. Synthesizing this new data with previously developed datasets for China, we find that the three countries’ overseas financing concentrated in fossil fuel power technologies over the studied period. Financing commitments from China, Japan, and the United States facilitated 101 GW, 95 GW, and 47 GW overseas power capacity additions, respectively. The majority of facilitated capacity additions are fossil fuel plants (64% for China, 87% for Japan, and 66% for the United States). Each of the countries’ contributions to non-hydro renewable generation was less than 15% of their facilitated capacity additions. Together, we estimate that overseas fossil fuel power financing through 2018 from these three countries will lock in 24 Gt CO2 emissions by 2060. If climate targets are to be met, replacing bilateral fossil fuel financing with financing of renewable technologies is crucial.
Type:
Dataset
Issue Date:
8 July 2021

184. Elemental and topographical imaging of microscopic variations in deposition on NSTX-U and DIII-D samples

Author(s):
Skinner, C.H.; Chrobak, C.P.; Kaita, R.; Koel, B.E.
Abstract:
Tokamak plasma facing components have surface roughness that can cause microscopic spatial variations in erosion and deposition and hence influence material migration, erosion lifetime, dust and tritium accumulation, and plasma contamination. However high spatial resolution measurements of deposition on the scale of the surface roughness have been lacking to date. We will present elemental images of graphite samples from NSTX-U and DIII-D DiMES experiments performed with a Scanning Auger Microprobe at sub-micron resolution that show strong microscopic variations in deposition and correlate this with 3D topographical maps of surface irregularities. The NSTX-U samples were boronized and exposed to deuterium plasmas and the DiMES samples had localized Al and W films and were exposed to dedicated helium plasmas. Topographical maps of the samples were performed with a 3D confocal optical microscope and compared to the elemental deposition pattern. The results revealed localized deposition concentrated in areas shadowed from the ion flux, incident in a direction calculated (for the DiMES case) by taking account of the magnetic pre-sheath.
Type:
Dataset
Issue Date:
October 2018

185. Deep convolutional neural networks for multi-scale time-series classification and application to disruption prediction in fusion devices

Author(s):
Churchill, R.M; the DIII-D team
Abstract:
The multi-scale, mutli-physics nature of fusion plasmas makes predicting plasma events challenging. Recent advances in deep convolutional neural network architectures (CNN) utilizing dilated convolutions enable accurate predictions on sequences which have long-range, multi-scale characteristics, such as the time-series generated by diagnostic instruments observing fusion plasmas. Here we apply this neural network architecture to the popular problem of disruption prediction in fusion tokamaks, utilizing raw data from a single diagnostic, the Electron Cyclotron Emission imaging (ECEi) diagnostic from the DIII-D tokamak. ECEi measures a fundamental plasma quantity (electron temperature) with high temporal resolution over the entire plasma discharge, making it sensitive to a number of potential pre-disruptions markers with different temporal and spatial scales. Promising, initial disruption prediction results are obtained training a deep CNN with large receptive field ({$\sim$}30k), achieving an $F_1$-score of {$\sim$}91\% on individual time-slices using only the ECEi data.
Type:
Dataset
Issue Date:
October 2019

186. Vertical forces during VDEs in an ITER plasma and the role of halo currents

Author(s):
Clasuer, C; Jardin, S; Ferraro, N
Abstract:
Vertical displacement events (VDEs) can occur in elongated tokamaks causing large currents to flow in the vessel and other adjacent metallic structures. To better understand the potential magnitude of the associated forces and the role of the so called ``halo currents'' on them, we have used the M3D-C1 code to simulate potential VDEs in ITER. We used actual values for the vessel resistivity and pre-quench temperatures and, unlike most of the previous studies, the halo region is naturally formed by triggering the thermal quench with an increase in the plasma thermal conductivity. We used the 2D non-linear version of the code and vary the post-thermal quench thermal conductivity profile as well as the boundary temperature in order to generate a wide range of possible cases that could occur in the experiment. We also show that, for a similar condition, increasing the halo current does not increase the total force on the wall since it is offset by a decrease in the toroidal contribution.
Type:
Dataset
Issue Date:
February 2020

189. Fluorescence Reconstruction Microscopy Data: Keratinocyte (10x) Phase to Nuclei (DAPI)

Author(s):
LaChance, Julienne; Cohen, Daniel
Abstract:
The data provided in this DataSpace consists of sample training data to be used for Fluorescence Reconstruction Microscopy (FRM) testing. We provide a subset of the keratinocyte (10x magnification) dataset used in our paper, in which interested parties may find more complete information about our data collection methods. Matched pairs of phase contrast and fluorescent images are given. The nuclei were stained using Hoechst 33342 and imaged using a standard DAPI filter set.
Type:
Dataset
Issue Date:
2 March 2020

190. Fluorescence Reconstruction Microscopy Data: MDCK (20x) DIC to Nuclei (DAPI) and E-Cadherin (RFP)

Author(s):
LaChance, Julienne; Cohen, Daniel
Abstract:
The data provided in this DataSpace consists of sample training data to be used for Fluorescence Reconstruction Microscopy (FRM) testing. We provide a subset of the MDCK (20x magnification) dataset used in our paper, in which interested parties may find more complete information about our data collection methods. Matched pairs of DIC and fluorescent images are given. The cells stably expressed E-cadherin:RFP which enabled imaging of junctional fluorescence, while the nuclei were stained using Hoechst 33342 and imaged using a standard DAPI filter set.
Type:
Dataset
Issue Date:
24 February 2020

191. Fluorescence Reconstruction Microscopy: Complete Testing Dataset

Author(s):
LaChance, Julienne; Cohen, Daniel
Abstract:
We provide all the test data and corresponding predictions for our paper, “Practical Fluorescence Reconstruction Microscopy for High-Content Imaging”. Please refer to the Methods section in this paper for experimental details. For each experimental condition, we provide the input transmitted-light images (either phase contrast or DIC), the ground truth fluorescence images, and the output predicted fluorescence images which should reconstruct the ground truth fluorescence images.
Type:
Dataset
Issue Date:
April 2020

192. CLEVR-Matrices

Author(s):
Mondal, Shanka Subhra; Webb, Taylor; Cohen, Jonathan
Abstract:
A dataset of Raven’s Progressive Matrices (RPM)-like problems using realistically rendered 3D shapes, based on source code from CLEVR (a popular visual-question-answering dataset) (Johnson, J., Hariharan, B., Van Der Maaten, L., Fei-Fei, L., Lawrence Zitnick, C., & Girshick, R. (2017). Clevr: A diagnostic dataset for compositional language and elementary visual reasoning. In Proceedings of the IEEE conference on computer vision and pattern recognition (pp. 2901-2910)).
Type:
Dataset
Issue Date:
1 March 2023

193. Visual Analogy Extrapolation Challenge (VAEC)

Author(s):
Webb, Taylor; Dulberg, Zachary; Frankland, Steven; Petrov, Alexander; O'Reilly, Randall; Cohen, Jonathan
Abstract:
Extrapolation -- the ability to make inferences that go beyond the scope of one's experiences -- is a hallmark of human intelligence. By contrast, the generalization exhibited by contemporary neural network algorithms is largely limited to interpolation between data points in their training corpora. In this paper, we consider the challenge of learning representations that support extrapolation. We introduce a novel visual analogy benchmark that allows the graded evaluation of extrapolation as a function of distance from the convex domain defined by the training data. We also introduce a simple technique, context normalization, that encourages representations that emphasize the relations between objects. We find that this technique enables a significant improvement in the ability to extrapolate, considerably outperforming a number of competitive techniques.
Type:
Dataset and Image
Issue Date:
2020

195. Data for Configurations and Characteristics of Simulated Single-Chain Nanoparticles

Author(s):
Webb, Michael; Patel, Roshan; Colmenares, Sophia
Abstract:
This item provides access to all configurations of single-chain nanoparticles analyzed in the manuscript "Sequence Patterning, Morphology, and Dispersity in Single-Chain Nanoparticles: Insights from Simulation and Machine Learning" by Roshan A. Patel, Sophia Colmenares, and Michael A. Webb (DOI: 10.1021/acspolymersau.3c00007). The single-chain nanoparticles derive from 320 unique precursor chains that are distinguished by the fraction of linker beads that decorate a fixed-length polymer backbone and the distribution or blockiness of those linker beads. The data is provided in the form of serialized object using the `pickle' python module. The data was compiled using Python version 3.8.8 and Clang 10.0.0. The Python object loaded from the .pkl file is a nested list, with the first dimension having 7,680 entries for the 7,680 unique single-chain nanoparticles produced in the aforementioned paper. Each of those 7,680 entries is itself a list with 20 entries, representing the 20 different simulation snapshots of the given single-chain nanoparticle. Each of the 20 entries is another list with two entries, with the first being a numpy.ndarray containing the x,y,z coordinates of all the beads comprising the single-chain nanoparticle and the second being a numpy.ndarray with a numerical encoding to indicate whether the beads are backbone (indicated as '0') or linker beads (indicated as '1'). Altogether, this provides 153,600 configurations of single-chain nanoparticles.
Type:
Dataset
Issue Date:
2 June 2023

196. Estimated The New York Times paragraph- and article-level sentiment on China topics, and aggregated survey attitude toward China

Author(s):
Huang, Junming; Cook, Gavin; Xie, Yu
Abstract:
Here we publish the data used in paper "Junming Huang, Gavin Cook, and Yu Xie, Large-scale Quantitative Evidence of Media Impact on Public Opinion toward China". This dataset include estimated sentiments on The New York Times on China in eight topics from 1970 to 2019, and a time series of public attitude aggregated from surveys on China.
Type:
Dataset
Issue Date:
July 2021

199. Optimization of the angular orientation for a fast ion loss detector in a tokamak

Author(s):
Darrow, D.
Abstract:
A scintillator type fast ion loss detector measures the gyroradius and pitch angle distribution of superthermal ions escaping from a magnetically confined fusion plasma at a single location. Described here is a technique for optimizing the angular orientation of such a detector in an axisymmetric tokamak geometry in order to intercept losses over a useful and interesting ranges of pitch angle. The method consists of evaluating the detector acceptance as a function of the fast ion constants of motion, i.e. energy, canonical toroidal momentum, and magnetic moment. The detector acceptance can then be plotted in a plane of constant energy and compared with the relevant orbit class boundaries and fast ion source distributions. Knowledge of expected or interesting mechanisms of loss can further guide selection of the detector orientation. The example of a fast ion loss detector for the National Spherical Torus Experiment-Upgrade (NSTX-U) is considered.
Type:
Dataset
Issue Date:
January 2017