Search

61. Streaked Sub-ps-resolution X-ray Line Shapes and Implications for Solid-density Plasma Dynamics

Author(s):
Kraus, B. Frances; Gao, Lan; Hill, K. W.; Bitter, M.; Efthimion, P. C.; Hollinger, R.; Wang, Shoujun; Song, Huanyu; Nedbailo, R.; Rocca, J. J.; Mancini, R. C.; MacDonald, M. J.; Beatty, C. B.; Shepherd, R.
Abstract:
A high-resolution x-ray spectrometer was coupled with an ultrafast x-ray streak camera to produce time-resolved line shape spectra measured from hot, solid-density plasmas. A Bragg crystal was placed near a laser-produced plasma to maximize throughput; alignment tolerances were established by raytracing. The streak camera produced single-shot time-resolved spectra, heavily sloped due to photon time-of-flight differences, with sufficient reproducibility to accumulate photon statistics. The images are time-calibrated by the slope of streaked spectra and dewarped to generate spectra emitted at different times defined at the source. The streaked spectra demonstrate the evolution of spectral shoulders and other features on ps timescales, showing the feasibility of plasma parameter measurements on the rapid timescales necessary to study high-energy-density plasmas.
Type:
Dataset
Issue Date:
2022

62. Study of Stark Broadening of Krypton Helium-beta Lines and Estimation of Electron Density and Temperature in NIF Compressed Capsules

Author(s):
Hill, K. W.; Gao, L.; Kraus, B. F.; Bitter, M.; Efthimion, P. C.; Pablant, N. A.; Schneider, M. B.; Thorn, D. B.; Chen, H.; Kauffman, R. L.; Liedahl, D. A.; MacDonald, M. J.; MacPhee, A. G.; Scott, H. A.; Stoupin, S.; Doron, R.; Stambulchik, E.; Maron, Y.; Lahmann, B.
Abstract:
Numerical data used to draw the figures in the manuscript
Type:
Dataset
Issue Date:
6 June 2022

63. Supplement to PhD Dissertation: "Subsurface Computational Modeling and Policy Analysis of Large-Scale Carbon Capture, Utilization, and Storage (2022)"

Author(s):
Tao, Yiheng
Abstract:
This dataset contains supplementary materials for Chapter 4 and Chapter 5 of Yiheng Tao's PhD dissertation (2022). The dissertation’s abstract is provided here: Carbon capture, utilization, and storage (CCUS) mitigates climate change by capturing carbon dioxide (CO2) emissions from large point sources, or CO2 from the ambient air, and subsequently reusing the captured CO2 or injecting it into deep geological formations for long-term and secure storage. Almost all current decarbonization pathways include large-scale CCUS, on the order of a billion tonnes (Gt) of CO2 captured and stored each year globally starting in 2030, yet the actual deployment has lagged far behind (around 0.04 Gt CO2 was captured in 2021). In this dissertation, I contribute to several aspects of largescale deployment of CCUS by (1) developing and applying efficient numerical models to simulate geological CO2 storage and (2) identifying key policies to address the bottlenecks of overall CCUS deployment. This dissertation concerns the United States, China, and the Belt and Road Initiative (BRI) region through research projects that are consistent with each location’s current development stage of CCUS. Chapters 2 and 3 contain computational modeling studies. In Chapter 2, I develop a new series of vertical-equilibrium (VE) models in the dual-continuum modeling framework to simulate CO2 injection and migration in fractured geological formations. Those models are shown to be effective and efficient when properties of the formation allow for the VE assumption. In Chapter 3, I apply a VE model to simulate basin-scale CO2 injection in the Junggar Basin of Northwestern China. The results show that current regional emissions of more than 100 million tonnes of CO2 per year can be stored effectively, thereby confirming the great potential of the Junggar Basin for early CCUS deployment. Chapters 4 and 5 contain policy analyses. In Chapter 4, I propose a dynamic system consisting of new CO2 pipelines and novel Allam-cycle power plants in the Central United States, and examine how government policies, including an extended Section 45Q tax credit, may improve the economic feasibility of this system. Lastly, in Chapter 5, I investigate and quantify CO2 emissions implications of power plant projects associated with the BRI. I also propose a “greenness ratio” to measure the level of environmental sustainability of BRI in the power sector.
Type:
Dataset
Issue Date:
18 May 2022

64. Supplemental material for: Verification, validation, and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane

Author(s):
Swanson, CPS; Kahn, S; Rana, C; Titus, PH; Brooks, AW; Guttenfelder, W; Zhai, Y; Brown, TG; Menard, JE
Abstract:
This is the supplemental material for the manuscript "Verification, validation, and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane" submitted to Fusion Engineering and Design. This material includes PDF writeups of the derivations of the axisymmetric extended plane strain model, the elastic properties smearing model, and 20+ MATLAB scripts and functions which implement the model and generate the figures in the paper.
Type:
collection, Dataset, and Software
Issue Date:
2022

66. TIGRESS simulation data

Author(s):
Kim, Chang-Goo; Ostriker, Eve; Gong, Munan; Kim, Jeong-Gyu
Abstract:
We present the public data release of the TIGRESS (Three-phase Interstellar Medium in Galaxies Resolving Evolution with Star Formation and Supernova Feedback) simulations. This release includes simulations representing the solar neighborhood environment at spatial resolutions of 2 and 4 pc. The original magneto-hydrodynamic simulation data is published along with data products from post-processing, including chemistry, CO emission line, and photoionization (HII regions). Data reading and analysis examples are provided in Python.
Type:
Dataset
Issue Date:
6 September 2022

69. Three dimensional archaeocyathide and coral imagery for morphologic analysis

Author(s):
Manzuk, Ryan; Maloof, Adam
Abstract:
In our study, we compare the three dimensional (3D) morphologic characteristics of Earth's first reef-building animals (archaeocyath sponges) with those of modern, photosynthetic corals. Within this repository are the 3D image data products for both groups of animals. The archaeocyath images were produced through serial grinding and imaging with the Grinding, Imaging, and Reconstruction Instrument at Princeton University. The images in this repository are the downsampled data products used in our study, and the full resolution (>2TB) image stacks are available upon request from the author. For the coral image data, the computed tomography (CT) images of all samples are included at full resolution. Also included in this repository are the manual and automated outline coordinates of the archaeocyath and coral branches, which can be directly used for morphological study.
Type:
Dataset, Image, MovingImage, and StillImage
Issue Date:
August 2022

70. To dee or not to dee: costs and benefits of altering the triangularity of a steady-state DEMO-like reactor

Author(s):
Schwartz, Jacob A.; Nelson, A. O.; Kolemen, Egemen
Abstract:
Shaping a tokamak plasma to have a negative triangularity may allow operation in an ELM-free L-mode regime and with a larger strike-point radius, ameliorating divertor power-handling requirements. However, the shaping has a potential drawback in the form of a lower no-wall ideal beta limit, found using the MHD codes CHEASE and DCON. Using the new fusion systems code FAROES, we construct a steady-state DEMO2 reactor model. This model is essentially zero-dimensional and neglects variations in physical mechanisms like turbulence, confinement, and radiative power limits, which could have a substantial impact on the conclusions deduced herein. Keeping its shape otherwise constant, we alter the triangularity and compute the effects on the levelized cost of energy (LCOE). If the tokamak is limited to a fixed B field, then unless other means to increase performance (such as reduced turbulence, improved current drive efficiency or higher density operation) can be leveraged, a negative-triangularity reactor is strongly disfavored in the model due to lower \beta_N limits at negative triangularity, which leads to tripling of the LCOE. However, if the reactor is constrained by divertor heat fluxes and not by magnet engineering, then a negative-triangularity reactor with higher B0 could be favorable: we find a class of solutions at negative triangularity with lower peak heat flux and lower LCOE than those of the equivalent positive triangularity reactors.
Type:
Dataset
Issue Date:
April 2022

71. Wall conditioning and ELM mitigation with boron nitride powder injection in KSTAR

Author(s):
Gilson, Erik; Lee, H; Bortolon, A; Choe, W; Diallo, A; Hong, SH; Lee, HM; Maingi, R; Mansfield, DK; Nagy, A; Park, SH; Song, IW; Song, JI; Yun, SW; Nazikian, R
Abstract:
Results from KSTAR powder injection experiments, in which tens of milligrams of boron nitride (BN) were dropped into low-power H-mode plasmas, show an improvement in wall conditions in subsequent discharges and, in some cases, a reduction or elimination of edge-localized modes (ELMs). Injected powder is distributed by the plasma flow and is deposited on the wall and, over the course of several discharges, was observed to gradually reduce recycling by 33%, and decrease both the ELM amplitude and frequency. This is the first demonstration of the use of BN for ELM mitigation. In all of these experiments, an Impurity Powder Dropper (IPD) was used to introduce precise, controllable amounts of the materials into ELMy H-mode KSTAR discharges. The plasma duration was between 10 s and 15 s, 𝐼𝑝 = 500 kA, 𝐵𝑇 = 1.8 T, 𝑃NBI = 1.6 MW, and 𝑃ECH = 0.6 MW. Plasma densities were between 2 and 3 × 1019 m−3. In all cases, the pre-fill and startup gas-fueling was kept constant, suggesting that the decrease in baseline D𝛼 emission is in fact due to a reduction in recycling. The results presented herein highlight the viability of powder injection for intra-shot and between-shot wall conditioning.
Type:
Dataset
Issue Date:
September 2021

72. bitKlavier Grand Sample Library—Harp Omni Mic Image

Author(s):
Trueman, Daniel
Abstract:
The bitKlavier Grand consists of sample collections of a new Steinway D grand piano from nine different stereo mic images, with: 16 velocity layers, at every minor 3rd (starting at A0); Hammer release samples; Release resonance samples; Pedal samples. Release packages at 96k/24bit, 88.2k/24bit, 48k/24bit, 44.1k/16bit are available for various applications.
Type:
Dataset and Sound
Issue Date:
24 March 2022

73. bitKlavier Grand Sample Library—House ORTF Mic Image

Author(s):
Trueman, Daniel
Abstract:
The bitKlavier Grand consists of sample collections of a new Steinway D grand piano from nine different stereo mic images, with: 16 velocity layers, at every minor 3rd (starting at A0); Hammer release samples; Release resonance samples; Pedal samples. Release packages at 96k/24bit, 88.2k/24bit, 48k/24bit, 44.1k/16bit are available for various applications.
Type:
Dataset and Sound
Issue Date:
24 March 2022

74. bitKlavier Grand Sample Library—House Wide Cardioid Mic Image

Author(s):
Trueman, Daniel
Abstract:
The bitKlavier Grand consists of sample collections of a new Steinway D grand piano from nine different stereo mic images, with: 16 velocity layers, at every minor 3rd (starting at A0); Hammer release samples; Release resonance samples; Pedal samples. Release packages at 96k/24bit, 88.2k/24bit, 48k/24bit, 44.1k/16bit are available for various applications.
Type:
Dataset and Sound
Issue Date:
24 March 2022

75. bitKlavier Grand Sample Library—Lip Cardioid Mic Image

Author(s):
Trueman, Daniel
Abstract:
The bitKlavier Grand consists of sample collections of a new Steinway D grand piano from nine different stereo mic images, with: 16 velocity layers, at every minor 3rd (starting at A0); Hammer release samples; Release resonance samples; Pedal samples. Release packages at 96k/24bit, 88.2k/24bit, 48k/24bit, 44.1k/16bit are available for various applications.
Type:
Dataset and Sound
Issue Date:
24 March 2022

76. bitKlavier Grand Sample Library—Stage Lid ORTF Mic Image

Author(s):
Trueman, Daniel
Abstract:
The bitKlavier Grand consists of sample collections of a new Steinway D grand piano from nine different stereo mic images, with: 16 velocity layers, at every minor 3rd (starting at A0); Hammer release samples; Release resonance samples; Pedal samples. Release packages at 96k/24bit, 88.2k/24bit, 48k/24bit, 44.1k/16bit are available for various applications.
Type:
Dataset and Sound
Issue Date:
24 March 2022

77. bitKlavier Grand Sample Library—Stage Lid Omni Mic Image

Author(s):
Trueman, Daniel
Abstract:
The bitKlavier Grand consists of sample collections of a new Steinway D grand piano from nine different stereo mic images, with: 16 velocity layers, at every minor 3rd (starting at A0); Hammer release samples; Release resonance samples; Pedal samples. Release packages at 96k/24bit, 88.2k/24bit, 48k/24bit, 44.1k/16bit are available for various applications.
Type:
Dataset and Sound
Issue Date:
24 March 2022

78. bitKlavier Grand Sample Library—Tail Omni Mic Image

Author(s):
Trueman, Daniel
Abstract:
The bitKlavier Grand consists of sample collections of a new Steinway D grand piano from nine different stereo mic images, with: 16 velocity layers, at every minor 3rd (starting at A0); Hammer release samples; Release resonance samples; Pedal samples. Release packages at 96k/24bit, 88.2k/24bit, 48k/24bit, 44.1k/16bit are available for various applications.
Type:
Dataset and Sound
Issue Date:
24 March 2022

79. A software package for plasma facing component analysis and design: the Heat flux Engineering Analysis Toolkit (HEAT)

Author(s):
Looby, Tom; Reinke, Matthew; Wingen, Andreas; Menard, Jonathan; Gerhardt, Stefan; Gray, Travis; Donovan, David; Unterberg, Ezekial; Klabacha, Jonathan; Messineo, Mike
Abstract:
The engineering limits of plasma facing components (PFCs) constrain the allowable operational space of tokamaks. Poorly managed heat fluxes that push the PFCs beyond their limits not only degrade core plasma performance via elevated impurities, but can also result in PFC failure due to thermal stresses or melting. Simple axisymmetric assumptions fail to capture the complex interaction between 3D PFC geometry and 2D or 3D plasmas. This results in fusion systems that must either operate with increased risk or reduce PFC loads, potentially through lower core plasma performance, to maintain a nominal safety factor. High precision 3D heat flux predictions are necessary to accurately ascertain the state of a PFC given the evolution of the magnetic equilibrium. A new code, the Heat flux Engineering Analysis Toolkit (HEAT), has been developed to provide high precision 3D predictions and analysis for PFCs. HEAT couples many otherwise disparate computational tools together into a single open source python package. Magnetic equilibrium, engineering CAD, finite volume solvers, scrape off layer plasma physics, visualization, high performace computing, and more, are connected in a single web-based user interface. Linux users may use HEAT without any software prerequisites via an appImage. This manuscript introduces HEAT, discusses the software architecture, presents first HEAT results, and outlines physics modules in development.
Type:
Dataset
Issue Date:
March 2021

80. A thermodynamic phase transition in magnetic reconnection

Author(s):
Jara-Almonte, Jonathan; Hantao, Ji
Abstract:
Data supporting the manuscript "A thermodynamic phase transition in magnetic reconnection" published in Physical Review Letters.
Type:
Dataset
Issue Date:
7 July 2021