The Volumetric Camera Calibration Dataset is used for a camera calibration system. Intersecting laser beams are traversed over a volume in the test domain. At each location, the intersecting beams are imaged by camera1 and camera2. A test object is imaged for evaluation.
Data set for "Film drop production over a wide range of liquid conditions." One .csv file is provided that contains data about the number of film drops produced by bursting bubbles of multiple sizes in various liquid conditions.
Data set for "Ocean emission of microplastic by bursting bubble jet drops." Two .csv files are provided: one for the size of a jet drop carrying microplastic, and another for the amount of microplastic captured by a jet drop.
Kiefer, Janik; Brunner, Claudia E.; Hansen, Martin O. L.; Hultmark, Marcus
Abstract:
This data set contains data of a NACA 0021 airfoil as it undergoes upward ramp-type pitching motions at high Reynolds numbers and low Mach numbers. The parametric study covers a wide range of chord Reynolds numbers, reduced frequencies and pitching geometries characterized by varying mean angle and angle amplitude. The data were acquired in the High Reynolds number Test Facility at Princeton University, which is a closed-loop wind tunnel that can be pressurized up to 23 MPa and allowed for variation of the chord Reynolds number over a range of 5.0 × 10^5 ≤ Re_c ≤ 5.5 × 10^6. Data were acquired using 32 pressure taps along the surface of the airfoil. The data are the phase-averaged results of 150 individual half-cycles for any given test case.
This dataset is affiliated with the publication https://doi.org/10.1007/s00348-022-03455-0. All of the data provided is necessary to reproduce the results with the aforementioned publication. The data in this repository is for the wake of a wind turbine at high Reynolds numbers. The data is mainly used for reproducing the statistics (deficit and variance profiles) and the phase averaged results.
This is the raw experimental dataset and the corresponding code to reproduce plots from the paper "Shear-induced migration of confined flexible fibers".
Brunner, Claudia E.; Kiefer, Janik; Hansen, Martin O. L.; Hultmark, Marcus
Abstract:
Reynolds number effects on the aerodynamics of the moderately thick NACA 0021 airfoil were experimentally studied by means of surface-pressure measurements. The use of a high-pressure wind tunnel allowed for variation of the chord Reynolds number over a range of 5.0 × 10^5 ≤ Re_c ≤ 7.9 × 10^6. The angle of attack was incrementally increased and decreased over a range of 0° ≤ alpha ≤ 40°, spanning both the attached and stalled regime at all Reynolds numbers. As such, attached and separated conditions, as well as the static stall and reattachment processes were studied. A fundamental change in the flow behaviour was observed around Re_c= 2.0 × 10^6. As the Reynolds number was increased beyond this value, the stall type gradually shifted from trailing-edge stall to leading-edge stall. The stall angle and the maximum lift coefficient increased with Reynolds number. Once the flow was separated, the separation point moved upstream and the suction peak decreased in magnitude with increasing Reynolds number. Two distinct types of hysteresis in reattachment were observed.
We provide all the test data and corresponding predictions for our paper, “Practical Fluorescence Reconstruction Microscopy for High-Content Imaging”. Please refer to the Methods section in this paper for experimental details. For each experimental condition, we provide the input transmitted-light images (either phase contrast or DIC), the ground truth fluorescence images, and the output predicted fluorescence images which should reconstruct the ground truth fluorescence images.
The data provided in this DataSpace consists of sample training data to be used for Fluorescence Reconstruction Microscopy (FRM) testing. We provide a subset of the keratinocyte (10x magnification) dataset used in our paper, in which interested parties may find more complete information about our data collection methods. Matched pairs of phase contrast and fluorescent images are given. The nuclei were stained using Hoechst 33342 and imaged using a standard DAPI filter set.
The data provided in this DataSpace consists of sample training data to be used for Fluorescence Reconstruction Microscopy (FRM) testing. We provide a subset of the MDCK (20x magnification) dataset used in our paper, in which interested parties may find more complete information about our data collection methods. Matched pairs of DIC and fluorescent images are given. The cells stably expressed E-cadherin:RFP which enabled imaging of junctional fluorescence, while the nuclei were stained using Hoechst 33342 and imaged using a standard DAPI filter set.
This is the dataset for the plots presented in the article "CO2-leakage-driven diffusiophoresis causes spontaneous accumulation of charged materials in channel flow."
